Product Review

Specification:

Dimension: 20mm x 25m (Width x Length)

Glass fiber thickness: 0.15mm

Thermal Conductivity:1.5 W/m-k

Breakdown Voltage: 5KVAC

Thermal impedance : 0.3℃in2/w

Initial Adhesion: 1.5kg/inch

180°Adhesion power: >18 N/25mm

Applicable temperature range:-30~+150 °C

Features:

Thermal conductivity and high stability, its life than the general heat double-sided stickers long,

normal temperature (30~+150 °C ) can work for a minimum of 5 years.

Notes For Attention:

1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.

2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).

3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours

to achieve the maximum adhesive strength,

That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.

4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,

In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.

Package included:

1 Roll Thermal Conductive Double-sided Tape