Product Review

Important:
LX-16A Bus Servo use our private serial protocol, so you must use our TTL/USB debug board(compatible for Arduino) to control bus servo, otherwise you cannot do anything with the bus servo.
The debug board required to purchase separately from our store. (no matter how many servos you control, you only need a debug board)

Features:
Each servo can set the ID number for the identification of the servo, the ID defaults to 1.
240 degree rotation. Controllable angle range from 0 to 240 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off.
Dual ball bearing: one is the driving shaft, one is the assistant shaft(support role)

Specifications:
Weight: 52g(1.8oz)
Dimension: 1.78*0.97*1.38inch
Speed: 0.18sec/60°@6V; 0.16sec/60°@7.4V
Servo accuracy: 0.24°
Torque: 15 kg/cm (208 oz/in) @6.6V; 17 kg/cm (236 oz/in) @7.4V
Servo ID: 0~253
Storage users' parameter setting after power off: support
Control method: serial command
Communication baud rate: 115200

Package Contents:
1 x Bus servo
2 x Servo Horn
1 x Main Screw
1 x Deputy Screw
15 x M2*4 Self-Tapping Screw
1 x 20cm(7.87inch) Servo Wire
1 x Service Card

Note:
1, Please access the link in the service card to get all informations(contain user manual, testing software, pc software, communication protocol, video tutorials)
2, Please ignore the website on the label of product.
3, Please refer to the torque parameter in our "Product Description"(it's accurate).

Please be sure to avoid locked-rotor when using servo, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out.